Xylan / PTFE coating

Since 1989 Vaibhavi Enterprises has maintained an in house coating shop. Xylan/PTFE coating can be applied for various types of applications & products. It is available in several industrial grades & colors. Our products have served customers within India and several overseas countries.

Xylan Coated Valve Ring  Xylan Coated Valve Ring

 We address all facts of the coating application with our goal- to provide the highest quality coated product and maintain control of the entire process.

We combine these two qualities for an unusually strong presence in the market. We have privilege of being FIRST Indian company which is been awarded Whitford’s “Quality Approved Coater” certification for Xylan/PTFE coating.

Xylan Coated S.Box Nut Xylan Coated S. Box Nut

What is Xylan Coating ?

Xylan is the largest, most complete line of fluoropolymer coatings in the worlds. Xylan coatings have a broad range of properties, which make them ideal for an infinite variety of applications. Xylan/PTFE coating on Bolts, Studs & Nuts is an ideal protestion in corrosive environments, salt water condition & specially for splash zone. Xylan coatings differ from traditional fluoropolymer coatings in one very important aspect: they are composite materials. Lubricants with the lowest-known coefficient of friction are combined with the newest high-temperature-resistant organic polymers.

Whitford’s “Quality Approved Coater” for Xylan / PTFE Coating.

Together, they from “Plastic alloys” with unique properties :
Low coefficient of friction : as low as 0.02.
• Superb wear resistance: even under extreme pressure.
• Outstanding corrosion and chemical resistance: in most environments.
• Wide operating-temperature ranges : from–1950C to + 2850C (-385F to + 5450F)
• Flexible curing schedule; ambient to 425C ( 8000F).
• Wide colour range : to Colour-code products.
• Pliability : Xylan coatings bend freely and repeatedly without breaking.
• Machineability : apply multiple coats of Xylan (most formulations) and mill.
• Excellent adhesion: to most metals, plastics, ceramics, wood, even to itself.

Xylan Coated Moulds
Xylan Coated Moulds


This fluorocarbon based finish, which is normally applied in a single coat, exhibits the following properties :
  • Exceptional hardness at elevated temperature.
  • Outstanding abrasion/Wear resistance.
  • Excellent adhesion to most substrates.
  • Easy application techniques.
  • Good chemical resistance against a range of chemicals.
  • Excellent weather resistance.

  Property Units 


 Tensile Strength  Psi 2.000 – 4.000
 Elongation  %

 35 - 50

 Water Absorption



 Service temperature





 Dielectric Strength


 1.200 – 2.000

 Coefficient of Friction


 Wear Resistance (K Factor) 

 CU.in – min x 10 
 1 lb – ft – hr

6 - 8

Solvent resistance   : Excellent.
Dilute cold acids     : Good.
Strong Alkali           :  To be avoided.
Strong detergents   :  To be  avoided.
Humidity                 :  Good.


Xylan coatings, particularly the formulation made with PTFE, offer a simple solution to the problem. Xylan is an
excellent corrosion barrier, even if applied in a thin film. Most formulations form functional films at about 25 microns. In ASTM – B – 117 salt spray test, Xylan/PTFE coating along with suitable pre-treatment of Zinc or Cadmium provides a minimum 100 hrs. & maximum upto 4000 hrs. protection.

This coating combat the severe corrosion that affect the massive studs & nuts on oil drilling rigs & petrochemicals processing equipments, as well as other items associated with the chemical processing industry. These coatings also permit the use of less expensive & stronger metal in place of stainless steel & other more exotic and costly materials.
Xylan’s versatility is best demonstrated as a coating for stud bolts and nuts, where it provides unparalleled performance in ease of installation, resistance to corrosion and ease of removal

Parts as received in WSNG
(L-R 3 coated parts, one phosphated part and 1 bare Substrate)

Uncoated parts after 140 hours of Salt Spray Test L-R Phosphated part and Bare Substrate

Coated parts after 1600 hours of Salt Spray Test ' XYALN ' is a registered trademark of 'Whitford'



Fusion bonded Epoxy Coating
Porous Plastic filter media
Fluoropolymer and other Coatings
Xylan / PTFE Coating
Textile spare for TFO Machines

Excellent Quality & Pricing

At VAIBHAVI ENTERPRISES, we recognize that our customer expect excellent quality along with our competitive pricing & superior customer service & best of delivery terms. We approach product quality as one of our core competencies & therefore we always focused on “ What can we do better?”.

Address :
Plot No. N/3, Cama Muncipal Industrial Estate, Walbhat Road, Opp. Jaipan Industries, Goregaon (E), Mumbai - 400063, Maharashtra, INDIA
Phone : +(91) - 022 - 26852862 / 26852149 Fax : ( 022 ) 26850886
Cell : 9820052056 / 9820052057